Photo-Phytotherapeutic Gel Composed of Copaifera reticulata, Chlorophylls, and k-Carrageenan: A New Perspective for Topical Healing.

Chronic wound healing represents an impactful financial burden on healthcare systems. In this context, the use of natural products as an alternative therapy reduces costs and maintains effectiveness. Phytotherapeutic gels applied in photodynamic therapy (PDT) have been developed to act as topical healing medicines and antibiotics. The bioactive system is composed of Spirulina sp. (source of chlorophylls) and Copaifera reticulata oil microdroplets, both incorporated into a polymeric blend constituted by kappa-carrageenan (k-car) and F127 copolymer, constituting a system in which all components are bioactive agents. The flow behavior and viscoelasticity of the formulations were investigated. The photodynamic activity was accessed from studies of the inactivation of Staphylococcus aureus bacteria, the main pathogen of hospital relevance. Furthermore, in vivo studies were conducted using eighteen rabbits with dermatitis (grade III and IV) in both paws. The gels showed significant antibiotic potential in vitro, eliminating up to 100% of S. aureus colonies in the presence or absence of light. The k-car reduced 41% of the viable cells; however, its benefits were enhanced by adding chlorophyll and copaiba oil. The animals treated with the phytotherapeutic medicine showed a reduction in lesion size, with healing and re-epithelialization verified in the histological analyses. The animals submitted to PDT displayed noticeable improvement, indicating this therapy's viability for ulcerative and infected wounds. This behavior was not observed in the iodine control treatment, which worsened the animals' condition. Therefore, gel formulations were a viable alternative for future pharmaceutical applications, aiming at topical healing.

Influence of dietary corn distillers' dried grains with solubles on nutrient digestibility, growth performance, and carcass traits in rabbits.

Two experiments were performed to evaluate the digestibility and growth performance of New Zealand White rabbits fed corn distillers' dried grains with solubles (DDGS). For the digestibility trial, 20 rabbits were housed in metabolic cages. The animals were distributed in two treatments, T1 (control diet without inclusion of DDGS) and T2 (control diet + 300 g kg-1 DDGS). For the growth performance trial, 100 rabbits (50 males and 50 females) were assigned in a factorial design 2 × 5 (2 gender × 5 inclusions of DDGS) and five replicates. The treatments were composed of diets with inclusions of 0, 60, 120, 180, and 240 g kg-1 of DDGS. The rabbits were housed at 35 days old, and the experiment lasted 35 days. The DDGS showed high digestibility for protein (74.10%) and lipids (81.51%) and a high content of digestible energy (2979 kcal kg-1). In the second trial, growth performance and carcass yield and organ relative weights were evaluated. There were no interactions between gender and DDGS inclusions (P > 0.05). A linear decrease was observed for feed intake (FI) for the period from days 35 to 50 (FI, P = 0.001) and FI and FCR from days 35 to 70 (FI, P = 0.004; FCR, P = 0.001) with the increasing levels of DDGS. Rabbits supplemented with 240 g kg-1 had lower (P < 0.05) whole carcass yield (WCY) and carcass without head yield compared with the control rabbits. DDGS is highly digestible in rabbits, and when supplemented up to 240 g kg-1 in diets, it improved FCR but reduced FI and WCY.

Characterization and Strength Quality of the Oryctolagus cuniculus Leather Compared to Oreochromis niloticus Leather.

This study aimed to compare the resistance of the Oryctolagus cuniculus L. (rabbit) and Oreochromis niloticus L. (Nile tilapia) skins, as well as to observe the design of the flower of these skins and the morphology of the dermis. Tilapia and rabbit skins were placed inside the same equipment (tannery machine) for the chromium salt tanning process. The flower design of the fish leather distinguishes it from the rabbit leather, the latter being constituted by the opening of the hair follicles and pores, while the fish leather is constituted by the presence of protective lamellae and insertion of the scales. The dermis of rabbit skin consists of thick bundles of collagen fibers arranged in all directions, which differs from the morphology observed in the dermis of fish skin. However, in the Nile tilapia skin dermis, overlapping and parallel layers of longitudinal collagen fiber bundles are observed, these layers are interspersed with fiber bundles crossing the sking surface (transversely), tying the fibers together and providing greater strength, which can be proven by the strength test. The fish leathers, despite having less thickness (1.0 mm), demonstrated significantly greater tensile strength (13.52 ± 1.86 N mm-2) and tear strength (53.85 ± 6.66 N mm-2) than rabbit leathers, that is, (8.98 ± 2.67 N mm-2) and (24.25 ± 4.34 N mm-2). However, rabbit leather demonstrated higher elasticity (109.97 ± 13.52%) compared to Nile tilapia leather (78.97 ± 8.40%). It can be concluded that although the rabbit leather is thicker due to the histological architecture of the dermis (thick bundles of collagen fibers arranged in all directions with no pattern of organization of collagen fibers), it shows less resistance than Nile tilapia leather, which demonstrates an organization of overlapping and parallel layers and intercalating collagen fiber bundles transversally to the surface, functioning as tendons for the swimming process. It is recommended to use a piece of fabric (lining) together with the fleshy side of the rabbit leather, to increase resistance when used in clothing and footwear, as these products require greater tensile strength. Thus, it minimizes this restriction for the use of rabbit leather in the aforementioned purposes.

Determinants of Undesirable Behaviors in American Quarter Horses Housed in Box Stalls.

The objective of this study was to investigate the management practices that affect undesirable behaviors in American Quarter Horses (AQH) confined to box stalls. A total of 105 adult AQH, comprising 29 females, 22 intact males, and 54 castrated males, housed in box stalls for at least 30 days, were included in the study. Behavioral activities were recorded through visual inspection at 5-min intervals over a 24-h period by two observers who took turns in shifts of 4 hours. Parameters related to animal characteristics, stall conditions, handling, training, nutrients supplied, and feeding behaviors were considered independent variables, and the time spent in undesirable behaviors was the dependent variable. Data were subjected to exploratory factor analysis and hierarchical cluster analysis. Four principal components were extracted. Two clusters were identified based on the time spent in undesirable behaviors: low-incidence group (25 ± 13 minutes) and high-incidence group (97 ± 52 minutes). Nutritional status (P = .1447), physiological status (P = .1372), and training routine (P = .1160) had no significant effects on the dependent variable; however, the effect of feeding behavior (P = .0444) was significant. A low dry matter intake/requirement ratio (P = .0470) and a high heart rate at rest (P = .0444) indicated that inadequate nutrient supply is a determinant of the time spent in undesirable behaviors in AQH. Aspects related to management practices such as horse nutrition, feeding behaviors, and training routine should be considered to reduce undesirable behaviors in AQH.

Main agents and contamination prevention in animal feed industry: review / Principais agentes envolvidos e formas de prevenção da contaminação na indústria de alimentação animal: revisão / Principales agentes involucrados y formas de prevención de la contaminación en la industria de alimentos para animales: revisión

The main physical, biological and chemical agents involved in cross-contamination are of known origin, generally harmful and toxic, which ends up making the individual have direct or indirect contact with the nutrients used in the manufacturing of animal feed. The knowledge of the causes, as well as their different forms of prevention and corrective actions, allow us to minimize losses in animal yield and possible extra costs in production due to the need to prevent the spread of pests and diseases to human health. Failure in monitoring the Good Manufacturing Practices (GMP), Standard Operating Procedures (SOPs), and Hazard Analysis and Critical Control Points (HACCP) systems due to lack of trained personnel or bad structural conditions of the industry are the main causes of cross-contamination. In this sense, diagnosing risks and controlling critical points in the production process are essential tools. Thus, this review aims at emphasizing the main forms of cross-contamination in the animal feed industry and the care that must be taken at the factory to minimize cross-contamination.(AU)

Os principais agentes físicos, biológicos e químicos envolvidos na contaminação cruzada são de origem conhecida, geralmente nociva e tóxica, que acabam fazendo com o diretor contato indireto com os nutrientes utilizados na fabricação de alimentos para animais. O conhecimento das causas, formas diferenciadas de prevenção e ações corretivas, permite minimizar as perdas no desempenho animal e, possíveis custos extras de produção, pela necessidade de evitar a propagação de pragas e danos à saúde humana. Falhas no monitoramento das Boas Práticas de Fabricação (BPF), Procedimentos Operacionais Padrão (POPs) e do sistema de Análise de Perigos e Pontos Críticos de Controle (HACCP) por falta de pessoal treinado ou más condições estruturais na indústria do contexto físico são as principais causas da ocorrência de contaminação cruzada. Nesse sentido, diagnosticar riscos e controlar pontos críticos no processo de produção são ferramentas indispensáveis. Dessa forma, o presente artigo de revisão visa destacar as principais formas de contaminação cruzada na indústria de ração animal e os cuidados que devem ser tomados na fábrica para minimizar a contaminação cruzada.(AU)

Los principales agentes físicos, biológicos y químicos involucrados en la contaminación cruzada son de origen conocida, generalmente nociva y tóxica, que terminan haciendo contacto directo o indirecto con los nutrientes utilizados en la fabricación de alimentos para animales. El conocimiento de las causas, las formas diferenciadas de prevención y las acciones correctivas, permiten minimizar las pérdidas en el rendimiento de los animales y, posibles costos extras de producción, por la necesidad de prevenir la propagación de plagas y daños a la salud humana. Fallas en el monitoreo de las Buenas Prácticas de Fabricación (BPF), Procedimientos de Operación Estándar (POE) y del sistema de Análisis de Peligros y Puntos de Control Críticos (HACCP) por falta de personal capacitado, o malas condiciones estructurales en la industria del contexto físico, son las principales causas de la ocurrencia de contaminación cruzada. En ese aspecto, diagnosticar los riesgos y controlar los puntos críticos en el proceso de producción son herramientas indispensables. Así, el presente artículo de revisión pretende evidenciar las principales formas de contaminación cruzada en la industria de alimentación animal y los cuidados que deben ser tomados en la fábrica para minimizar la contaminación cruzada.(AU)

Predicting the metabolizable energy of first and second corn harvests for piglets / Predição da energia metabolizável do milho de primeira e segunda safra para leitões

ABSTRACT Corn is one of the primary ingredients in swine diets, but there is a variation in its chemical composition and metabolizable energy (ME) content. Therefore, faster methods are required that can determine more accurate ME values to improve piglet diets. This study determined and predicted the ME of corn from first and second harvests for piglets. Two experiments were conducted to determine the ME values for 18 corn batches, evaluating corn from first and second harvests. The corn batches were analysed to determine the concentration of dry matter (DM), starch (ST), neutral detergent fiber (NDF), acid detergent fiber (ADF), crude protein (CP), ether extract (EE), ash, calcium (Ca), phosphorus (P) and gross energy (GE). To determine the ME values, 40 piglets were used in each experiment, grouped into a randomized block design with four replicates. The ME of the corn from the first and second crops ranged from 3281 to 3509 and from 3143 to 3652 kcal/kg on an as-fed basis, respectively, and the fitted equations to predict the ME presented a low R2. The best fit equation for predicting the ME of corn for piglets was determined to be ME= - 6306.15 + 400.652ADF + 117.286ST + 24924.7Ca + 2489.66P - 148.41CP (R2=0.44) for the first harvest; ME= -7560.08 + 2.66895GE - 120.69ADF (R2=0.48) for the second harvest; and ME= 2848.95 + 68.5714NDF + 161.938EE - 5563.5Ca - 1454.2P (R2=0.41) for the joint harvest.

RESUMO O milho é um dos principais alimentos utilizados em rações para suínos, porém existem variações em sua composição química e conteúdo de energia metabolizável (EM). Portanto, são necessários métodos rápidos para se determinar os valores de EM de forma precisa, melhorando as dietas dos leitões. O trabalho determinou e ajustou equações de predição de EM do milho de 1a e 2a safra para leitões. Foram realizados dois experimentos para determinar os valores de EM de 18 cultivares de milho, avaliando-se os milhos de 1ª e 2ª safras. Foram realizadas as análises de matéria seca (MS), amido (AMI), fibra em detergente neutro (FDN), fibra em detergente ácido (FDA), proteína bruta (PB), extrato etéreo (EE), matéria mineral (MM), cálcio (Ca), fósforo (P) e energia bruta (EB) dos milhos. Para a determinação dos valores energéticos foram utilizados 40 animais em cada experimento, distribuídos em um delineamento experimental de blocos ao acaso com quatro repetições. Os valores de EM dos milhos de 1ª e 2ª safra variaram de 3281 a 3509 e de 3143 a 3652 kcal/kg MN, respectivamente, as equações ajustadas para predizer a EM apresentaram baixo R2. Os melhores ajustes para predizer a EM do milho para leitões são representados pelas equações EM= - 6306,15 + 400,652FDA + 117,286AMI + 24924,7Ca + 2489,66P - 148,41PB (R2=0,44), para os milhos de 1ª safra; EM = -7560,08 + 2,66895EB - 120,69FDA (R2=0,48), para os milhos de 2ª safra; e para o período completo de safras foi ajustada a equação EM= 2848,95 + 68,5714FDN + 161,938EE - 5563,5Ca - 1454,2P (R2=0,41).

Effect of passion fruit seed meal on growth performance, carcass, and blood characteristics in starter pigs.

Two experiments were carried out in Paraná State, Brazil, to evaluate the nutritional value of passion fruit seed meal (PFM) and to study the effect of PFM on growth performance, carcass, and blood characteristics in starter pigs (Topigs 20 × Tybor). In experiment 1, 25 castrated males, averaging 19.1-kg body weight, were individually fed in a completely randomized block design, consisting of five treatments and five replicates and an experimental period that lasted 14 days. In experiment 2, a total of 60 pigs (30 females and 30 castrated males) were distributed in a randomized block design with five treatments, six replications, and two animals per experimental unit and 90 days of experimentation. For both experiments, the same PFM inclusion rates were used in the experimental diets, namely, 0, 4, 8, 12, and 16 %. The metabolizable energy of PFM was estimated to be 15.0 MJ/kg. Inclusion of PFM at any level did not affect average daily gain, daily feed intake, feed/gain ratio, backfat thickness, loin depth, and plasma or blood components. It is concluded that passion fruit seed meal for swine in the starting phase can be added at a rate of up to 16 % in the diet without any negative effects on growth performance, carcass, and blood characteristics in starter commercial line pigs.